TrolMaster Tent-X Monitors 

TrolMaster Tent-X Monitors

TrolMaster offer a range of Tent-X monitors to closely measure and read your environment, ensuring all aspects of the grow environment are suitable for your plants.

The MBS-SD is a Smoke Detector that will alert the user to smoke within their growing area, This can be useful incase of power surges or fuses blowing within the setup, alerting the user before the problem gets out of hand. The Tent-X base unit can have 1 Smoke Detector connected at a time. This comes with a T-splitter and a 16 foot RJ12 Cable.

The MBS-S8 is a CO2 Sensor, measuring CO2 PPM within the growing area, this allows supplemental CO2 systems to be connected and ran off the Tent-X base unit. This comes with a T-splitter and a 16 foot RJ12 Cable.

The MBS-TH is a 3-in-1 Sensor for the Hydro-X, this Temperature, Humidity and Light Sensor comes with the Tent-X base unit, and is simply a replacement part. It comes with a T-splitter and a 16 foot RJ12 Cable.

The MBS-PAR is a Full Spectrum Quantum Sensor, this provides an accurate and cost-effective measurement of photosynthetically active radiation (PAR). The Sensor has a spectral range of 389 to 692nm (within a variance of 5nm), this improves the spectral response increases the accuracy of LED measurements. The PPFD sensor will automatically increase or decrease the output level of your lighting system to maintain the lighting level the user selects. This includes a 1/2″ Post Clamp, a 4 foot RJ12 Cable, a T-splitter and 2x 1/2″ End Cap.

The WD-2 is a Water Detector Designed to alert the user to any water leaks or water on the floor, Up to 5 Detector Probes (TSS-1) can be connected to a single base unit, and if any of the sensors can detect a water leakage, it will send a user-alert notification via the Tent-X base unit (if it is connected to the internet). The WD-2 comes with a Detector Probe and an Extension Cable.

The AMP-3 is a Sensor Board used for the Tent-X, it is designed to be connected to the base unit via an Rj12 cable and allows you to monitor both pH and EC levels. This includes a 16 foot RJ12 Cable, a 4 foot RJ12 Cable and a T-splitter.

The PPH-1 is a Reservoir pH Sensor, this provides an accurate and reliable recording of the pH measured. This probe is connected to the Tent-X base unit via the AMP-3.

The PPH-2 is a Heavy-Duty Intank pH Sensor, this provides an accurate and reliable recording of the pH within a nutrient/water tank. This probe is connected to the Tent-X base unit via the AMP-3.

The PPH-3 is a Heavy-Duty Inline Nutrient pH Sensor, this probe is intended for use inside a standard 3/4″ PVC Tee Fitting. The PPH-3 has an improved sensor for more stable and reliable readings. This probe must be connected to the Tent-X base unit via the AMP-3.

The PCT-1 is a Reservoir EC/Temperature Sensor, this probe provides an accurate reading on the EC and Temperature of the water measured. It also requires being connected to the AMP-3 for readings on the Tent-X base unit.

The PCT-2 is a Heavy-Duty Intank EC/Temperature Sensor, this probe measures the EC and Temperature within a nutrient/water tank. This probe is connected to the Tent-X base unit via the AMP-3.

The PCT-3 is a Heavy-Duty Inline Nutrient EC/Temperature Sensor, this probe is intended for use inside a standard 3/4″ PVC Tee Fitting. The PCT-3 has an improved sensor for more stable and reliable readings. It must be connected to the Tent-X base unit via the AMP-3.

The WCS-1 is a Water Content Sensor, this allows the user to monitor the percentage of water/nutrients within the growing medium. The moisture level is displayed on the WCS-1 and the Tent-X, on the TrolMaster app data is displayed in graph format to help the user visualise the dry-down time. this allows more accurate adjustments to feed cycles. This comes with a T-splitter and a 16 foot RJ12 Cable.

The WCS-2 is a 3-In-1 Water Content Sensor, this measures Water Content, EC and Temperatures within the growing medium. This provides constant readings and even allows you to set alarm limits for each variable to provide you with notifications of any adverse changes to the growing medium.

The WCS-3 is a Water Content Sensor specifically designed to measure the moisture level of the growing medium. The WCS-3 sensor is a 3-prong Volumetric Water Content sensor, which is inserted into the growing medium, up to 8 can be connected to the Tent-X base unit, and it comes with a M12 T-Splitter and a 4 foot M12 Cable.