TrolMaster Hydro-X Controls 

TrolMaster Hydro-X Controls

The Trolmaster Hydro-X Controls offers a range of device stations enabling you to connect your devices to make the most of your Hydro-X base unit by controlling all factors of your growing environment.  

The TS-1 is a Thermostat Station, it is designed to replace the thermostat connected to a conventional cool only HVAC unit, this allows the Hydro-X to run separate Day and Night settings for up to 4 TS modules. It is wired to the HVAC system using the same low-voltage cable the previous thermostat was wired with. This comes with a 16 foot RJ12 Cable, a 4 foot RJ12 Cable and a T-splitter.

The TS-2 is a Thermostat Station, it is designed to replace the thermostat connected to a conventional heat pump and multi-stage HVAC unit, this allows the Hydro-X to run separate Day and Night settings for up to 4 TS modules. It is wired to the HVAC system using the same low-voltage cable the previous thermostat was wired with. This comes with a 16 foot RJ12 Cable, a 4 foot RJ12 Cable and a T-splitter. The TS-2 also has an adjustable delay time for each HVAC system to reduce high start-up (inrush current).

The ARS-1 is a AC Remote Station designed to work universally with most mini-split air conditioners, as long as the unit came with an IR controller, using the IR controller on the air conditioner we can “teach” those signals to the ARS-1 module allowing the desired Day or Night temperature setting to be automatically reached based on the photocell sensor status. This comes with a Signal Emitter, a 16 foot RJ12 Cable, a 4 foot RJ12 Cable and a T-splitter.

The DST-2U is a 240v Temperature Device Station, allowing you to control any heating or cooling device under 240v and 10A. This includes a 16 foot RJ12 Cable, a 4 foot RJ12 Cable and a T-splitter.

The DSH-2U is a 240v Humidity Device Station, allowing you to control humidifiers or dehumidifiers under 240v and 10A (under 7A for dehumidifiers). This includes a 16 foot RJ12 Cable, a 4 foot RJ12 Cable and T-splitter.

The HS-1 is a Humidistat Station designed for use with larger/commercial dehumidifiers. It uses a low-voltage external control to remove the need to control the high-amperage/inrush current associated with dehumidifiers. This includes a 16 foot RJ12 Cable, a 4 foot RJ12 Cable and a T-splitter.

The DSC-2U is a CO2 Device Station, this allows users to connect and control supplemental CO2 devices to the Hydro-X, this module controls any CO2 devices under 240v and up to 10A. This comes with a 16 foot RJ12 Cable, a 4 foot RJ12 Cable and a T-splitter.

The DSP-2U is a 240v Program Device Station, this works like a multi-function timer. The DSP-2U allows the user to connect any device under 240v that needs to be controlled by time. This allows pumps to be set up with timed flood settings if needed. This comes with a 16 foot RJ12 Cable, a 4 foot RJ12 Cable and a T-splitter.

The DSD-1 Aqua-X is a Dry Contact Station, this enables devices such as Lighting Contactors, Light Deprivation Curtains, Pump Contactors, Temperature Devices, Humidity Devices and CO2 Devices to be connected to the base unit by being wired into the DSD-1. This comes with a 16 foot RJ12 Cable, a 4 foot RJ12 Cable and a T-splitter.

The DCC-1 is a Dual Condition Adaptor designed to control a single device with more than one condition. For example turning on exhaust fans when temperature is too high, and shutting off CO2 when the exhaust fans turns on. The DCC-1 is designed to be used in combination with several different modules (DSC-2U, DSH-2U, DST-2U, DSP-2U, DSV-1 and DSD-1). Once connected to the module using the RJ12 cable built into the DCC-1, the Dual Condition Adaptor will act in concert with the module to control whatever device is connected to the plugged in module.

The TSH-1 is a Temperature/Humidity Station, this can be configured to control either a temperature or humidity device that requires a variable 0-10v input signal. The TSH-1 is capable of controlling variable speed fans or vents that accept a 0-10v input. It features a separate day and night idle speed settings as well as setpoints. This TSH-1 includes a 16 foot RJ12 Cable, a 4 foot RJ12 Cable and a T-splitter.

The DSV-1 is a Low-Voltage Output Station, allowing temperature, humidity, CO2 or timer devices to be connected. This allows users to directly connect low-voltage devices such as solenoids, valves, audio visual alarms or any other device that requires 12 to 24v AC or DC power to operate. This comes with a 16 foot RJ12 Cable, a 4 foot RJ12 Cable and a T-splitter.

The TC-1 is a Grow Camera, this is a high-quality surveillance camera designed to provide 24/7 live video monitoring of your grow area. the TC-1's built-in night vision has been engineered to use invisible IR illuminators allowing you to see up to 35ft by using ultra-low infrared emissions. The camera can be viewed on the TrolMaster app to see the setup in real time. A built-in MicroSD card slot is available for video recording. The TC-1 includes a Wall Mount Screw Set and a Water-Resistant Cap Set.