Bluelab Probe Care Kit For Conductivity

Bluelab Probe Care Kit – Conductivity
Everything you need to clean and test conductivity (ppm/EC) / temperature probes. The instrument is only as accurate as the probe is clean. 

Accurate readings simplify crop management and provide improved growth. Proper ppm/EC probe maintenance also ensures you maximize the life of the probe and instrument. The probe surface is where the instrument takes the reading of the solution. If the probe face is dirty or contaminated, the readings may be inaccurate. Much like the windshield of a car, if it’s dirty you can’t see out! If the probe face is dirty, it cannot read the solution. A tip… if the conductivity reads low, the probe needs cleaning.

How to use
Remove the shroud from the Truncheon. Rinse the probe face and then add one or two droplets of the Probe Cleaner onto the probe face and rub with Bluelab Chamois or vigorously with your finger. Rinse off all the cleaner under a running tap while still scrubbing with the other side of the probe cleaner. Check in the EC standard solution, repeat the process until the Truncheon reads correctly.

• Bluelab 2.77 EC Conductivity Standard Solution
• Bluelab Conductivity Probe Cleaner
• Bluelab Chamois
• Easy to use
• Helps the longevity and accuracy of the meter