TrolMaster Aqua-X Monitors 

TrolMaster Aqua-X Monitors

The TrolMaster Aqua-X Monitors allow increased monitoring and measurement within your growing environment, this provides the ability to closely monitor and alter your irrigation system.

The WD-2 is a Water Detector Designed to alert the user to any water leaks or water on the floor, Up to 5 Detector Probes (TSS-1) can be connected to a single base unit, and if any of the sensors can detect a water leakage, it will send a user-alert notification via the Aqua-X base unit (if it is connected to the internet). The WD-2 comes with a Detector Probe and an Extension Cable.

The PPH-1 is a Reservoir pH Sensor, this provides an accurate and reliable recording of the pH measured. This probe is connected to the Aqua-X base unit via the AMP-2.

The PPH-2 is a Heavy-Duty Intank pH Sensor, this provides an accurate and reliable recording of the pH within a nutrient/water tank. This probe is connected to the Aqua-X base unit via the AMP-2.

The PPH-3 is a Heavy-Duty Inline Nutrient pH Sensor, this probe is intended for use inside a standard 3/4″ PVC Tee Fitting. The PPH-3 has an improved sensor for more stable and reliable readings. This probe must be connected to the Aqua-X base unit via the AMP-2.

The PCT-1 is a Reservoir EC/Temperature Sensor, this probe provides an accurate reading on the EC and Temperature of the water measured. It also requires being connected to the AMP-2 for readings on the Aqua-X base unit.

The PCT-2 is a Heavy-Duty Intank EC/Temperature Sensor, this probe measures the EC and Temperature within a nutrient/water tank. This probe is connected to the Aqua-X base unit via the AMP-2.

The PCT-3 is a Heavy-Duty Inline Nutrient EC/Temperature Sensor, this probe is intended for use inside a standard 3/4″ PVC Tee Fitting. The PCT-3 has an improved sensor for more stable and reliable readings. It must be connected to the Aqua-X base unit via the AMP-2.

The AMP-2 is a Sensor Board that connects into the Aqua-X base unit and enables pH, EC and Temperature readings of the water/nutrient solution to be measured. Minimum and Maximum Limits can be set on the Aqua-X providing 24/7 notifications of pH/ EC or Temperatures that our out of limits. This comes with a 2.5m Signal Cable, enabling the AMP-2 to be connected to the Aqua-X base unit.

The WCS-1 is a Water Content Sensor, this allows the user to monitor the percentage of water/nutrients within the growing medium. The moisture level is displayed on the WCS-1 and the Aqua-X, on the TrolMaster app data is displayed in graph format to help the user visualise the dry-down time. this allows more accurate adjustments to feed cycles. When multiple WCS-1 are connected to a single Aqua-X base unit, the value shown of the Aqua-X base unit and the app will be the average across all the sensors. This comes with a T-splitter and a 16 foot RJ12 Cable.

The WCS-2 is a 3-In-1 Water Content Sensor, this measures Water Content, EC and Temperatures within the growing medium. This provides constant readings and even allows you to set alarm limits for each variable to provide you with notifications of any adverse changes to the growing medium.

The WCS-3 is a Water Content Sensor specifically designed to measure the moisture level of the growing medium. The WCS-3 sensor is a 3-prong Volumetric Water Content sensor, which is inserted into the growing medium, up to 8 can be connected to the Aqua-X base unit, and it comes with a M12 T-Splitter and a 4 foot M12 Cable.