TrolMaster Hydro-X Monitors 

TrolMaster Hydro-X Monitors

TrolMaster offer several different monitors that enable you to get a more accurate measure of the environment within your system, these also enable products such as humidifiers/ dehumidifiers and heaters among others that can be controlled (when used alongside the necessary program modules). In order to run all these Monitors off a single base unit, you can either use the T-splitters provided or use a SPH-1 (8-way Splitter Hub) for a tidier connection format.

The MBS-SD is a Smoke Detector that will alert the user to smoke within their growing area, This can be useful incase of power surges or fuses blowing within the setup, alerting the user before the problem gets out of hand. The Hydro-X base unit can have up to 5 Smoke Detectors connected at a time. This comes with a T-splitter and a 16 foot RJ12 Cable.

The MBS-S8 is a CO2 Sensor, measuring CO2 PPM within the growing area, this allows supplemental CO2 systems to be connected and ran off the Hydro-X base unit. This comes with a T-splitter and a 16 foot RJ12 Cable.

The MBS-TH is a 3-in-1 Sensor for the Hydro-X, this Temperature, Humidity and Light Sensor comes with the Hydro-X base unit, and is simply a replacement part. It comes with a T-splitter and a 16 foot RJ12 Cable.

The MBS-PAR is a Full Spectrum Quantum Sensor, this provides an accurate and cost-effective measurement of photosynthetically active radiation (PAR). The Sensor has a spectral range of 389 to 692nm (within a variance of 5nm), this improves the spectral response increases the accuracy of LED measurements. The PPFD sensor will automatically increase or decrease the output level of your lighting system to maintain the lighting level the user selects. This includes a 1/2″ Post Clamp, a 4 foot RJ12 Cable, a T-splitter and 2x 1/2″ End Caps.

The WD-2 is a Water Detector Designed to alert the user to any water leaks or water on the floor, Up to 5 Detector Probes (TSS-1) can be connected to a single base unit, and if any of the sensors can detect a water leakage, it will send a user-alert notification via the Hydro-X base unit (if it is connected to the internet). The WD-2 comes with a Detector Probe and an Extension Cable.